News Center
Provide customers with a full range of customized system solutions
Installation and maintenance of cooling fans
Release time:
2023-07-13
Before installation, we should first check whether there is any damage or deformation caused by packing and transporting, if there is any damage or deformation, we should repair it and then install it.
Installation
1、 Before installation, we should first check whether there is any damage or deformation caused by packing and transporting, if there is any damage or deformation, we should repair it and then install it.
2, and then check the parts and screws whether there is loose; blade and wind cylinder whether between the touch or displacement, if the touch or displacement should be adjusted before installation.
3, the cooling fan should be tested after installation, and the fan should be used after normal operation.
4、 When the fan is put into use again for a long time, the fan should be checked and tried if there is no abnormality before it is put into use.
5. After the fan is installed, the junction should be sealed to prevent the short circuit caused by leakage of the junction from burning the motor.
Handling
1. In the process of handling, pay attention to holding and placing gently, handling and placing according to the signs and requirements of the packing box, and do not place it upside down or standing up.
2、 Avoid strong impact and violent vibration during the process of transporting to prevent the packing box and products from being damaged.
3. The fan should be stored in the place with airy, dry and no corrosive gas, avoiding rain and sunshine.
Latest news
— Provide customers with a full range of customized system solutions
Contact Us
Address: East side of No. 7 Huanpu International Industrial Park, No. 835 Hanjiang West Road, Xinbei District, Changzhou City, Jiangsu Province
Tel：+86 0519-85522317
Fax：+86 0519-85529317
E-mail：sales@winder.hk
Mobile Website
Copyright © 2023 Winder Precision Machinery (Changzhou) Co., Ltd.